Cisco Nexus 7000 Series Configuration Manual page 27

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
Preface
This document describes the configuration details for Cisco NX-OS unicast routing.
Audience
To use this guide, you must be familiar with IP and routing technology.
Organization
This document is organized into the following chapters:
Title
Chapter 1, "Overview"
Chapter 2, "Configuring IPv4"
Chapter 3, "Configuring IPv6"
Chapter 4, "Configuring DNS"
Chapter 5, "Configuring WCCPv2"
Chapter 6, "Configuring OSPFv2"
Chapter 7, "Configuring OSPFv3"
Chapter 8, "Configuring EIGRP"
Chapter 9, "Configuring IS-IS"
Chapter 10, "Configuring Basic BGP"
Chapter 11, "Configuring Advanced BGP"
OL-20002-02
Description
Presents an overview of unicast routing and brief
descriptions of each feature.
Describes how to configure and manage IPv4, including
ARP and ICMP.
Describes how to configure and manage IPv6, including
Neighbor Discovery Protocol and ICMPv6.
Describes how to configure DHCP and DNS clients.
Describes how to configure WCCPv2.
Describes how to configure the OSPFv2 routing protocol
for IPv4 networks.
Describes how to configure the OSPFv3 routing protocol
for IPv6 networks.
Describes how to configure the Cisco EIGRP routing
protocol for IPv4 networks.
Describes how to configure the IS-IS routing protocol for
IPv4 and IPv6 networks.
Describes how to configure basic features for the BGP
routing protocol for IPv4 and IPv6 networks.
Describes how to configure advanced features for the
BGP routing protocol for IPv4 and IPv6 networks,
including route redistribution and route aggregation.
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
iii