Clearing Bgp Information - Cisco Nexus 7000 Series Configuration Manual

Configuring Basic BGP
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .

Clearing BGP Information

To clear BGP information, use the following commands:
Command
clear bgp all {neighbor | * | as-number |
peer-template name | prefix} [vrf vrf-name]
clear bgp all dampening [vrf vrf-name]
clear bgp all flap-statistics [vrf vrf-name]
clear bgp {ip | ipv6} {unicast | multicast}
dampening [vrf vrf-name]
clear bgp {ip | ipv6} {unicast | multicast}
flap-statistics [vrf vrf-name]
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
10-18
Chapter 10
Purpose
Clears one or more neighbors from all address
families. * clears all neighbors in all address
families. The arguments are as follows:
neighbor—IPv4 or IPv6 address of a
•
neighbor.
• as-number— Autonomous system number.
The AS number can be a 16-bit integer or a
32-bit integer in the form of higher 16-bit
decimal number and a lower 16-bit decimal
number in xx.xx format.
name—Peer template name. The name can be
•
any case-sensitive alphanumeric string up to
64 characters.
prefix—IPv4 or IPv6 prefix. All neighbors
•
within that prefix are cleared.
• vrf-name—VRF name. All neighbors in that
VRF are cleared. The name can be any
case-sensitive alphanumeric string up to 64
characters.
Clears route flap dampening networks in all
address families. The vrf-name can be any
case-sensitive alphanumeric string up to 64
characters.
Clears route flap statistics in all address families.
The vrf-name can be any case-sensitive
alphanumeric string up to 64 characters.
Clears route flap dampening networks in the
selected address family. The vrf-name can be any
case-sensitive alphanumeric string up to 64
characters.
Clears route flap statistics in the selected address
family. The vrf-name can be any case-sensitive
alphanumeric string up to 64 characters.
Configuring Basic BGP
OL-20002-02