Glass Height Adjustment; Glass Replacement - Honda Civic 2002-2003 Service Manual

Table of Contents

Advertisement

Glass Height Adjustment
The roof panel (A) should be even with the glass
weatherstrip (8), to within 2+0.5/-1 mm (0.08+0.02/
-0.04 in.) all the way around. If not, make the following
adjustment:
t······················
~.
,
,,'
.~
A
1. Remove the bracket cover from each side.
2. Loosen the nuts (A), and install the shims (8)
between the glass frame (C) and glass bracket (D)
on each side.
Shim thickness: Front and rear max. 2 mm (0.08 in.)
C
B
.~-j~=~~~~J
---_=-__
-=-c--- -- ---
D
Forward
..
A
6x 1.0 mm
9 N·m (0.9 kgf·m, 7 Ibf·ftl
3. If necessary, repeat on the opposite side.
Glass Replacement
1. Close the glass fully.
2. Slide the sunshade all the way back.
3. Remove the screws (A), then remove both bracket
covers
(8).
Remove the nuts (C) and shims (D) from
both glass brackets (E).
Fastener Locations
A~:Screw,2
C.:Nut,4
_O=@
~~4;.t
\ .C
~.CA
p=f \/
6
x
1.0
mm
9 N·m (0.9 kgf·m, 7 Ibf·ftl
4. Remove the glass (A) by lifting it up. Do not
damage the roof panel.
~-----~--
-,,-.-
---------------- --- --
5. Install the glass in the reverse order of the removal,
and adjust the glass height alignment.
6. Check for water leaks. Use free-flowing water from
a hose without a nozzle. Do not use high-pressure
water .
20-37

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents