Rear Seat Belt Replacement - Honda Civic 2002-2003 Service Manual

J
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, and
replace them if necessary. Be careful not to damage
them during removal and installation.
Rear Seat Belt
1. Remove the rear seat cushion (see page 20-801.
2. Remove the lower anchor bolt (AI.
A
7/16-20
UNF
j
32 N·m 13.3 kgf.m,
24lbf·ltl
~
Forward
~-
~-----
..
~
~~
.
'--'
3. Remove the rear side trim panel (see page 20-511.
4. Remove the retractor mounting self-tapping ET
screw (AI, and the retractor bolt (BI. then remove
the rear seat belt (CI and retractor (DI.
B
7/16-20
UNF
32 N·m 13.3 kgf.m, 24lbf·ltl
c
/
D
A
6x 1.0mm
3.4 N·m 10.35 kgf.m, 2.5 Ibf·ltl
5. Install the seat belt in the reverse order of removal,
and note these items:
• If the threads on the retractor mounting self-
tapping ET screw are worn out, use an oversized
self-tapping ET screw !PIN 90133-5Z4-00301
made specifically for this application.
• Apply liquid thread lock to the anchor bolt before
rei n5tallation,
• Check that the retractor locking mechanism
functions (see page 23-91.
Before installing the anchor bolt, make sure there
are no twists or kinks in the rear seat belt.
(conl'dl
23-7