Honda Civic 2002-2003 Service Manual page 358

Table of Contents

Advertisement

4. Align the quick-connect fittings with the line (A),
and align the retainer (B) locking pawls with the
connector
(e)
grooves. Then press the quick-
connect fittings onto the line until both retainer
pawls lock with a clicking sound.
NOTE: If it is hard to connect, put a small amount of
new engine oil on the line end.
Connection with new retainer:
Reconnection to existing retainer:
5. Make sure the connection is secure and that the
pawls are firmly locked into place; check visually
and by pulling the connector.
6. Reconnect the negative cable to the battery, and
turn the ignition switch ON (II). The fuel pump will
run for about 2 seconds, and fuel pressure will rise.
Repeat 2 Or 3 times, and check that there are no
fuel leaks.
11-151

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents