Table of Contents
Advertisement
~,
6. Reconnect the battery negative cable.
7. Erase the DTC memory.
8. Read the DTC.
Is OTe 12-4 indicated?
YES-Go to step 9.
NO-Short to power in the front passenger's side
airbag inflator; replace the front passenger's side
airbag Isee page
23-1151..
9. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
10. Disconnect the driver's side airbag 2P connector
Isee step
4
on page
23-21)
and both seat belt buckle
tensioner
4P
connectors Isee step 6 on page
23-22).
11.
Disconnect SRS unit connector B
118P)
from the
SRS unit Isee step 7 on page
23-22).
12.
Turn the ignition switch ON (II).
13.
Check for voltage between the No.7 terminal of
SRS unit connector B
118P)
and body ground, and
between the No.
18
terminal and body ground.
There should be 0.5 V or less.
SRS UNIT CONNECTOR B (ISP)
Wire side of female terminals
Is the voltage as specified?
YES-Faulty SRS unit; replace the SRS unit Isee
page
23-1221..
NO-Short to power in the floor wire harness;
replace the floor wire harness .•
23-89
Advertisement
Table of Contents
Troubleshooting
