Daytime Running Lights Control Unit Input Test - Canada - Honda Civic 2002-2003 Service Manual

Exterior Lights
Daytime Running Lights Control Unit Input Test - Canada
The DRL indicator light in the gauge assembly will come on when you turn the ignition switch to ON (II) with the
headlight switch off and the parking brake set. It should go off when you turn on the headlight switch and release the
parking brake. If it comes on at any other time, do the control unit input test.
NOTE: When the daytime running lights are on, the high beam indicator will glow at half its normal intensity.
1. Remove the driver's dashboard lower cover (see page 20-60).
2. Disconnect the 14P connector (A) from the daytime running lights control unit (8).
B~
RED/BlU
RED/BLU
BlK
BLU/RED RED/VEL VEL/RED
Wire side of
female terminals
3. Inspect the connector and socket terminals to be sure they are all making good contact.
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
If the terminals look OK, go to step 4.
22-76