Configuring Flows; Adding A Flow - Cisco MDS 9000 series Configuration Manual

Chapter 5 Configuring IOA Using Fabric Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-20
Select the switches from the Assigned Interfaces table that you want to remove.
Step 2
Step 3 Click Remove to move the switches to Unassigned Interfaces table.
Step 4 Click Apply.

Configuring Flows

You can select the flows in a named cluster to see the details in the information pane. The upper table
in the information pane displays information on active IOA flows. The lower table in the information
pane displays information on candidate IOA flows.

Adding a Flow

To add a flow in the cluster using IOA Manager, follow these steps:
Expand the Cluster node in the navigation pane and then click Flows.
Step 1
You see the IOA Manager window displaying the Assigned Flows and Unassigned Flows as shown in
Figure
If IVR zoneset is activated, Fabric Manager will automatically consider the IVR zoneset and list the
Note
candidate IVR flows in the Unassigned flows section.
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
Removing Interfaces Using IOA Manager
5-21.
Cisco MDS 9000 Family I/O Accelerator Configuration Guide

Configuring Flows

5-13