Verifying The Cluster Configuration; Configuration Example - Cisco MDS 9000 series Configuration Manual

Chapter 2 Getting Started
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Verifying the Cluster Configuration

To verify the node configuration, use the show ioa cluster name node summary command:
sw-231-14# show ioa cluster
-------------------------------------------------------------------------------
Switch
-------------------------------------------------------------------------------
sw-231-14(L)
sw-231-19
To verify the ip address of the node, use the show ioa cluster name node command:
Node sw-231-14 is local switch
Node ID is 1
IP address is 10.1.1.1
Status is online
Belongs to Site site2
Node is the master switch
Node sw-231-19 is remote switch
Node ID is 2
IP address is 10.1.1.2
Status is online
Belongs to Site site1
Node is not master switch
sw-231-14#
To see all of the configured interfaces in the IOA cluster, use the show ioa cluster name interface
summary command:
sw-231-14# show ioa cluster cltr1 interface summary
-------------------------------------------------------------------------------
Switch
-------------------------------------------------------------------------------
sw-231-14(L)
sw-231-14(L)
sw-231-19
sw-231-19
sw-231-14#

Configuration Example

This section includes an example for creating an IOA cluster using IPFC interface.
the IOA cluster configuration used in this example. The sample topology shows the FC ISL between
sw-231-14 and sw-231-19 switches.
Figure 2-1
Interface vsan 1 : 10.1.1.2
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
Site
site2
site1
Interface
ioa1/1
ioa1/2
ioa4/1
ioa4/2
Configuration Example
IOA stie : site1
Sw-231-19
cltr1 node summary
Status
online
online
Status Flows
up 0
up 0
up 0
up 0
Interface vsan 1 : 10.1.1.1
IOA stie : site2
FCISL
Sw-231-14
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Using IOA Cluster with IPFC Interface
Master Node ID
yes 1
no 2
Figure 2-1 illustrates
2-9