Removing The Ioa Cluster From The Remote Node; Verifying The Ioa Cluster In The Remote Node; Removing The Remote Node From The Cluster In The Local Switch; Changing The Local Node Configuration To Use Ipfc Address - Cisco MDS 9000 series Configuration Manual

Chapter 2 Getting Started
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2011 Apr
the Cluster 0x2e06000dec18a133

Shutting Down the IOA cluster on the remote node

The following example shuts down the IOA cluster on the remote node using shut down command:
sw-231-19(config)# ioa cluster cltnew
sw-231-19(config-ioa-cl)# show
This change can be disruptive. Please ensure you have read the "IOA Cluster Recovery
Procedure" in the configuration guide. -- Are you sure you want to continue? (y/n) [n] y
2011 Apr
the Cluster 0x2e06000dec18a133
sw-231-19(config-ioa-cl)# exit

Removing the IOA Cluster from the Remote Node

The following example remove the IOA cluster from the remote node using the no ioa cluster cluster
name command:
sw-231-19(config)# no ioa cluster

Verifying the IOA Cluster in the Remote Node

The following example verify the presence of IOA cluster on the remote node using show ioa cluster
cluster name command:
sw-231-19(config)# show ioa cluster
sw-231-19(config)#

Removing the Remote Node from the Cluster in the Local Switch

The following example removes the remote node from the cluster in the local switch:
sw-231-14(config-ioa-cl)# no node sw-231-19
sw-231-14(config-ioa-cl)# show ioa cluster
-------------------------------------------------------------------------------
Switch
-------------------------------------------------------------------------------
sw-231-14(L)

Changing the Local Node Configuration to use IPFC Address

The following example change the local node to use IPFC address:
sw-231-14(config-ioa-cl)# node id 1 sw-231-14 ip-address 10.1.1.1
sw-231-14(config-ioa-cl-node)# exit

Activating the Single Node Cluster

The following example activates the single node cluster:
sw-231-14(config-ioa-cl)# no show
This change can be disruptive. Please ensure you have read the "IOA Cluster Recovery
Procedure" in the configuration guide. -- Are you sure you want to continue? (y/n) [n] y
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
8 05:36:41 sw-231-14 %CLUSTER-2-CLUSTER_LOCAL_NODE_EXIT: Local Node 0x1 has left
8 05:37:03 sw-231-19 %CLUSTER-2-CLUSTER_LOCAL_NODE_EXIT: Local Node 0x2 has left
Site
--
cltnew
cltnew node summary
Status Master
unknown (cluster is offline)
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Using IOA Cluster with IPFC Interface
Node ID
1
2-15