Removing A Flow - Cisco MDS 9000 series Configuration Manual

Chapter 5 Configuring IOA Using Fabric Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-23
Click the arrow icon to configure the flow in this direction.
Step 7
(Optional) Check the Use this directon for the rest of the Flow group check box to apply the same
Step 8
direction to rest of the flow group.
Note
Click Add and then click Apply.
Step 9

Removing a Flow

To add a flow in the cluster using IOA Manager, follow these steps:
Step 1 Expand the Cluster node in the navigation pane and then click Flows.
You see the IOA Manager window displaying the Assigned Flows and Unassigned Flows as shown in
Figure
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
Configure Flow Dialog Box
You may use this step only if some of the N ports are registered as both initiators and targets,
especially in cases of remote replication flow.
5-24.
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Configuring Flows
5-15