Cisco MDS 9000 series Configuration Manual page 88

Configuring Flows
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 5-21
Check the Click Show All Zoned Flow Candidates check box to display all the zoned members.
Step 2
Select one or more switches from the Unassigned Flows in the information pane and then click Add.
Step 3
You see the Add Flows dialog box as shown in
Figure 5-22
Enter a flow group name.
Step 4
Check the Enable Compression check box to enable compression.
Step 5
Check the Enable Tape Acceleration check box to enable tape acceleration.
Step 6
Note
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
5-14
Adding Flows Using IOA Manager
Flow Configuration Dialog Box
Write accleration is enabled by default.
Chapter 5 Configuring IOA Using Fabric Manager
Figure 5-22.
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)