Removing Switches From A Site; Configuring Clusters; Adding A New Cluster - Cisco MDS 9000 series Configuration Manual

Chapter 5 Configuring IOA Using Fabric Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In the navigation pane, click Sites.
Step 1
Select the switches that you want to add from the Unassigned Switches table.
Step 2
Click Add, and then click Apply.
Step 3

Removing Switches from a Site

To remove a switch from a site, follow these steps:
Step 1 In the navigation pane, click Sites.
You see the IOA Manager window as shown in
Figure 5-10
Step 2 Click to select the switches you want to remove from Assigned Switches table.
Step 3 Click Remove, and then click Apply.

Configuring Clusters

You can select a cluster to see the details in the information pane. The upper table in the information
pane displays the members of a named cluster, and the table below displays the statistical information
about the cluster's active IOA interfaces.

Adding a New Cluster

To create a new cluster using IOA Manager, follow these steps:
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
Removing Switches from a Site Using IOA Manager
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Figure 5-10.

Configuring Clusters

5-7