Configuring Interfaces; Assigning Interfaces To A Cluster - Cisco MDS 9000 series Configuration Manual

I/o accelerator

Hide thumbs Also See for MDS 9000 series:

Table of Contents

Chapter 5

Configuring IOA Using Fabric Manager

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Figure 5-18

Configuring Interfaces

You can select the interfaces in a named cluster to see the details in the information pane. The upper table

in the information pane displays information about active and configured IOA interface pairs associated

with the cluster. The lower table in the information pane displays information about IOA interface

candidates that are ready for use in the cluster.

To add a new interface to a cluster using IOA Manager, follow these steps:

Step 1

Expand the cluster node in the navigation pane and click Interfaces.

You see the IOA Manager window as shown in

OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)

Viewing Cluster Details

Cisco MDS 9000 Family I/O Accelerator Configuration Guide

Figure

5-19.

5-11

Table of Contents