Removing A Cluster - Cisco MDS 9000 series Configuration Manual

Chapter 5 Configuring IOA Using Fabric Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Note
You see a message box upon successfully creating a cluster as shown in
Figure 5-14
Click OK.
Step 5
If the master switch that you selected is not a member of the site, you may either need to add the switch
Note
to an existing site or to create a new site.

Removing a Cluster

To remove a site using IOA Manager, follow these steps:
Step 1 In the navigation pane, click the name of the cluster that you want to delete.
You see the IOA Manager window as shown in
Figure 5-15
Click the Remove icon on the toolbar.
Step 2
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
You need to select a switch that you would like it to be the master switch as the seed switch when
you create the IOA cluster. If you have multiple switches in a site, you may add all the switches
in a site that you would like to manage from to the cluster before adding the switches from the
remote site.
Message Box
Removing a Cluster Using IOA Manager
Figure 5-15.
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Configuring Clusters
Figure 5-14.
5-9