2-Port Oc48-Pos/Rpr Spa Interface Specifications; 2-Port Oc48-Pos/Rpr Spa Cables, Optical Transceiver Modules, And Connectors; 1-Port Oc-192C/Stm-64 Pos/Rpr Spa Overview - Cisco Catalyst 6500 Series Hardware Installation Manual

Hide thumbs Also See for Catalyst 6500 Series:
Table of Contents

Advertisement

Chapter 3
Catalyst 6500 Series Switch SPA Overview

2-Port OC48-POS/RPR SPA Interface Specifications

The physical layer interface for the 2-Port OC48-POS/RPR SPA is Optical Carrier-48 (OC-48), and the
2-Port OC48-POS/RPR SPA is designed to comply with POS specifications. The
2-Port OC48-POS/RPR SPA provides two 2.488-Gbps network interfaces for all supported platforms.
2-Port OC48-POS/RPR SPA Cables, Optical Transceiver Modules, and
Connectors
Use single-mode (for intermediate-configurations) optical fiber cable to connect your router to a network
or to connect two OC-48-equipped routers back-to-back.
The 2-Port OC48-POS/RPR SPA supports the following types of optical transceiver modules:
Each port on the 2-Port OC48-POS/RPR SPA has one duplex LC-type receptacle. For single-mode
optical fiber connections, you can use either a duplex LC-type cable (see
LC-type cables, one for transmit (TX) and one for receive (RX).
Figure 3-21
RX

1-Port OC-192c/STM-64 POS/RPR SPA Overview

The 1-Port OC-192c/STM-64 POS/RPR SPA is a double-height SPA that is installed in two SIP subslots.
The 1-Port OC-192c/STM-64 POS/RPR SPA provides SONET and SDH network connectivity with a
bandwidth of 9.95 Gbps.
For more information about SPA bandwidth, see the
For more information about SPAs and their compatibility with SIPs and modular optics, see the
SSC, and SPA Compatibility" section on page
The 1-Port OC-192c/STM-64 POS/RPR SPA uses a single,10-Gbps fixed optical receptacle allowing a
connection to single-mode optical fiber. For more information on the optical fiber cables used with this
SPA, see the
Cables" section on page
OL-9041-04
Single-mode short-reach (SR) SFP module—SFP-OC48-SR
Single-mode intermediate-reach (IR) SFP module —SFP-OC48-IR1
Single-mode long-reach (LR) SFP module — SFP-OC48-LR2
Duplex Patch Cable with LC-Type Connectors
TX
"1-Port OC-192c/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and
3-29.
/ /
/ /
/ /
"Bandwidth Oversubscription" section on page
1-3.
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide

1-Port OC-192c/STM-64 POS/RPR SPA Overview

Figure
3-21) or two simplex
3-3.
"SIP,
3-27

Advertisement

Table of Contents
loading

Table of Contents