Table; Cisco 7600 Sip-200; 7600-Sip-200 - Cisco Catalyst 6500 Series Hardware Installation Manual

Cisco 7600 SIP-200 Overview
Cisco 7600 SIP-200 Physical Specifications

Table 2-4

Table 2-4
Description
Physical dimensions
Shipping weight
Operating temperature
Relative humidity
Storage temperature
Cisco 7600 SIP-200 Memory Options
Table 2-5
Table 2-5
SIP

7600-SIP-200

Note The SIP DIMMs must be a matched set. A warning message will appear on the console if the DIMMs
on the SIP are different sizes. If the sizes are not the same, the following message will appear at
bootup/OIR:
C7600_SIP200-3-MEM_MODULE_MISMATCH: Memory modules are not identical
Cisco 7600 SIP-200 Memory Installation and Removal
Figure 2-4
To install a DIMM, slide the DIMM into the slot. The retaining clips will secure the DIMM in place.
To remove a DIMM, separate the two retaining clips and pull the DIMM from the slot.
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
2-6
describes the 7600-SIP-200 physical specifications.
7600-SIP-200 Physical Specifications
Specifications
The SIP occupies one module slot and can be operated in Cisco 7600
series routers.
8 lb (3.64 kg)
32 to 104°F (0 to 40°C)
10 to 90 percent, noncondensing
–4 to 149°F (–20 to 65°C)
lists the memory available for the 7600-SIP-200.
SIP Memory Options
Memory Options
512 MB and 1 GB (2 x 256-MB or 2 x 512-MB DIMMs)
shows the location of the DIMMs on a 7600-SIP-200.
Chapter 2 Catalyst 6500 Series Switch SIPs and SSCs Overview
OL-9041-04