1-Port Oc-192C/Stm-64 Pos/Rpr Spa Leds - Cisco Catalyst 6500 Series Hardware Installation Manual

1-Port OC-192c/STM-64 POS/RPR SPA Overview
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR SPA:
•
•
•

1-Port OC-192c/STM-64 POS/RPR SPA LEDs

The 1-Port OC-192c/STM-64 POS/RPR SPA has six LEDs, as shown in
Figure 3-22 1-Port OC-192c/STM-64 POS/RPR SPA Faceplate
1
2
3
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. In
Note
Cisco IOS Release 12.0(31)S, RPR/SRP mode is not supported.
Table 3-16
Table 3-16 1-Port OC-192c/STM-64 POS/RPR SPA LEDs
LED Label
WRAP
PASSTHRU
MATESYNC
CARRIER
Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
3-28
1-Port OC-192c/STM-64 POS/RPR SPA LEDs, page 3-28
1-Port OC-192c/STM-64 POS/RPR SPA Interface Specifications, page 3-29
1-Port OC-192c/STM-64 POS/RPR SPA Fixed Optical Transceiver, 40-Pin Connector, and Cables,
page 3-29
TX
WRAP LED
PASSTHRU LED
MATESYNC LED
describes the 1-Port OC-192c/STM-64 POS/RPR SPA LEDs.
Color State
Off Off
Green On
Amber On
Off Off
Amber On
Off Off
Green On
Off Off
1 3 5
2 4
RX
4 CARRIER LED
5
ACTIVE LED
6
STATUS LED
Meaning
Port is not in wrap mode.
Port is in wrap mode somewhere on the ring.
Port is in wrap mode locally.
Port is not in pass-thru mode.
Port is in pass-thru mode.
Mate port is not synchronized.
Mate port is synchronized.
Port is not enabled by software.
Chapter 3 Catalyst 6500 Series Switch SPA Overview
Figure 3-22.
6
SPA-OC192POS LR
OL-9041-04