Cisco ASA 5505 Configuration Manual page 1186

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

Mail
Click Configure Web Scanning to open a screen for configuring HTTP scanning settings on the CSC
Step 5
SSM.
The Web Reputation area is display-only and shows whether or not the Web Reputation service is
enabled on the CSC SSM.
Step 6
Click Configure Web Reputation to open a screen for configuring the Web Reputation service on the
CSC SSM.
What to Do Next
See the
Mail
The Mail pane lets you see whether or not e-mail-related features are enabled and lets you access the
CSC SSM GUI to configure these features. To configure e-mail related features, choose Configuration
> Trend Micro Content Security > Mail.
This section includes the following topics:
SMTP Tab
To access the CSC SSM, you must reenter the CSC SSM password. Sessions in the CSC SSM browser
Note
time out after ten minutes of inactivity. If you close the CSC SSM browser and click another link in
ASDM, you are not prompted for the CSC SSM password again, because one session is already open.
To configure SMTP scanning, perform the following steps:
Click the SMTP Tab.
Step 1
The Incoming Scan area is display-only and shows whether or not the incoming SMTP scanning feature
Step 2
is enabled on the CSC SSM. Click Configure Incoming Scan to open a screen for configuring incoming
SMTP scan settings on the CSC SSM.
The Outgoing Scan area is display-only and shows whether or not the outgoing SMTP scanning feature
Step 3
is enabled on the CSC SSM. Click Configure Outgoing Scan to open a screen for configuring outgoing
SMTP scan settings on the CSC SSM.
The Incoming Filtering area is display-only and shows whether or not content filtering for incoming
Step 4
SMTP e-mail is enabled on the CSC SSM. Click Configure Incoming Filtering to open a screen for
configuring incoming SMTP e-mail content filtering settings on the CSC SSM.
The Outgoing Filtering area is display-only and shows whether or not content filtering for outgoing
Step 5
SMTP e-mail is enabled on the CSC SSM. Click Configure Outgoing Filtering to open a screen for
configuring outgoing SMTP e-mail content filtering settings on the CSC SSM.
Cisco ASA 5500 Series Configuration Guide using ASDM
56-14
"Mail" section on page
SMTP Tab, page 56-14
POP3 Tab, page 56-15
Chapter 56
56-14.
Configuring Trend Micro Content Security
OL-20339-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5540Asa 5520Asa 5550Asa 5580

Table of Contents