Wizard Setup - Cisco ASA 5505 Configuration Manual

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

CSC SSM Setup
Restoring the Default Password
You can use ASDM to reset the CSC SSM password. You can reset this password to the default value,
which is "cisco" (excluding quotation marks). If the CSC password-reset policy has been set to
"Denied," then you cannot reset the password through the ASDM CLI. To change this policy, you must
access the CSC SSM through the adaptive security appliance CLI by entering the session command. For
more information, see the Cisco Content Security and Control (CSC) SSM Administrator Guide.
This option does not appear in the menu if an SSM is not installed.
Note
To reset the CSC SSM password to the default value, perform the following steps:
Step 1
Choose Tools > CSC Password Reset.
The CSC Password Reset confirmation dialog box appears.
Click OK to reset the CSC SSM password to the default value.
Step 2
A dialog box appears, indicating the success or failure of the password reset. If the password was not
reset, make sure you are using Version 8.0(2) software on the adaptive security appliance and the most
recent Version 6.1.x software on the CSC SSM.
Click Close to close the dialog box.
Step 3
Step 4
After you have reset the password, you should change it to a unique value.
What to Do Next
See the

Wizard Setup

The Wizard Setup screen lets you start the CSC Setup Wizard. To start the CSC Setup Wizard, click
Launch Setup Wizard. To access the Wizard Setup screen, choose Configuration > Trend Micro
Content Security > CSC Setup > Wizard Setup.
Before you can directly access any of the other screens under CSC Setup, you must complete the CSC
Setup Wizard. This wizard includes the following screens:
After you complete the CSC Setup Wizard once, you can change any settings in screens related to the
CSC SSM without using the CSC Setup Wizard again.
Cisco ASA 5500 Series Configuration Guide using ASDM
56-8
"Password" section on page
CSC Setup Wizard Activation Codes Configuration, page 56-9
CSC Setup Wizard IP Configuration, page 56-9
CSC Setup Wizard Host Configuration, page 56-9
CSC Setup Wizard Management Access Configuration, page 56-10
CSC Setup Wizard Password Configuration, page 56-10
CSC Setup Wizard Traffic Selection for CSC Scan, page 56-11
CSC Setup Wizard Summary, page 56-12
Chapter 56
56-7.
Configuring Trend Micro Content Security
OL-20339-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5540Asa 5520Asa 5550Asa 5580

Table of Contents