Memory Status; Editing Video; C Clipping Video - Sharp GC40K Manual

Table of Contents

Advertisement

,
Among Motion Camera files, V604SH plays only MPEG-4 video files. Nancy video
files are not supported.
Playback Operations
1
Press A. During fast forward, press b to pause.
Fast Forward
1
Press B. During fast reverse, press b to pause.
Fast Reverse
Press b to pause
Stop
Press C (up) or D (down) to adjust volume (with Mic On).
Adjust Volume
Select from six levels (0 - 5).
Press k to toggle display size as follows: enlarged (with indicators)
Change Display
% enlarged (no indicators) % 100% (with indicators)
2
Size
(When enlarged, images may not fit Display.)
1
Not available for Movie Sha-mail files.
2
For Video Camera files, press to show or hide indicators.
+
7
Press j for 1+ seconds to activate or cancel Manner Mode.

Memory Status

H
A
Index Menu
Functions
Settings 1
Select 3 File Cabinet and press h or b
1
Memory usage status appears as a percentage (%).
C
To check Memory Card status, select 3File Cabinet
A
A
Press h or b
Select Memory Card
When Memory is Full
When saving images, memory shortage warning may appear. To save images, press
r or g and follow these steps to delete files.
Press r for 1+ seconds or press d Z
1
Select Delete and press h or b
2
Select a file type and press h or b
3
C
To switch to Memory Card, press r (Long Press) or d I
A
Press h or b
Select a file and press h or b
4
Choose 1 Yes and press h or b
5
7-32
A
Memory
A
Press r (Long Press) or d I
A
Select Memory Card

Editing Video

1
Edit
Save portion of 5 or 10 seconds from selected point as a new file
1
Still Image
Save selected frame as a new file
2
Select 2 points
Save portion between two points as a new file
2
Delete Front
Save portion before or after selected point as a new file
2
Delete Back
2
Delete All
Delete video being played
3
Telop Edit
Add telops (text) to video
1
Available for Motion Camera files.
2
Available for Motion Camera and Video Camera files.
3
Available for Movie Sha-mail files.
,
^ Some files may not be edited.
^ Edited video may not play properly if Memory Card is not formatted for V604SH.
+
Clipped Motion Camera video portions are saved to Data Folder (Movies) as MPEG-4
files with a .3gp extension. Use them as Super Mail attachments or add telops.
Clipping Video
Select a portion of video, then reduce image size (Reduce) or crop edges (Clipping).
^ If video was captured with Mic On (Fine), sound is disabled in clipped portions.
^ Clip up to 10 seconds when Image Size (see Step 4 below) is 80x60 and up to 5 seconds
when 128x96 is selected.
H
A
A
Index Menu
Camera
Camera Files
Select a file and press b
1
Video plays.
Press b at approximate start point for clipping
2
Video pauses.
Press d Z
3
Select 1 Edit and press b
4
C
To change mode, select 2Edit Setting
Press b
A
Select 1Clipping or 2Reduce
C
To set size, select 2Edit Setting
A
Press b
Select 180x60 or 2128x96
A
Press b
Choose 1 Yes and press b
5
Motion Camera Data
A
Press b
A
Select 1Mode Setting
A
A
Press b
A
Select 2Image Size
A
Press b
A
7-33
7

Advertisement

Table of Contents
loading

Table of Contents