C Call History; Handling Incoming Calls; C Placing Callers On Hold; Viewer Position - Sharp GC40K Manual

Call History
Up to 20 received calls are saved in Call History (see P.2-16). When Caller ID is sent,
2
numbers appear. Place calls directly to those numbers.
1
2
3
^ Names in Secret Mode entries appear only in Secret Mode.
+
^ Records remain even after handset power is turned off.
^ When there are 20 records, oldest records are replaced by new ones. To delete
records manually, see P.2-16.
2-8
Press D
1
N
J E
P
Missed Call
3: 7/17 17:2*
Suzuki Itirou
2: 7/16 11:2*
Ueda Mikio
1: 7/15 12:45
03123XXXX1
XMemo
Redial Select 選択 Menu
Received numbers appear with date and time.
Name appears if saved in Phone Book.
Select a record and press b
2
Press f
3
Number is dialed.

Handling Incoming Calls

Placing Callers on Hold
Callers placed on hold hear a message explaining that you cannot answer their call
right away and asking them to hold or call back later.
1
When a call arrives, open handset
Press g
2
Hold tone sounds for five seconds.
^ No tone sounds when Ring Tone Level is set to
Press f to answer the call
3
^ Alternatively, press keys for Anykey Answer
1
3
2

Viewer Position

Place callers on hold with Display in Viewer position
When a call arrives, press c (Long Press)
press h (Long Press)
Hold or Reject with Clamshell Closed
C When Side Key Settings for Incoming Calls (see P.15-3) is set to 1 Hold or
3 Reject Call, press the assigned key for 1+ seconds during incoming calls to
activate the function.
^ Press g or close handset (clamshell closed) to end calls on hold. However, closing
,
handset does not end the call if Close to End Call (see P.2-3) is canceled.
^ Calls on hold end if callers hang up.
Silent.
(see P.2-6).
A
To answer the call,
2-9
2