Table of Contents
Advertisement
Incoming Call
2
1
2
3
Viewer Position
Answer calls with Display in Viewer position
When a call arrives, press h (Long Press)
c (Long Press)
^ Side Key Assignments for Incoming Calls:
h
Open Incoming Call Menu
h
Answer call
(Long Press)
c
Activate Quick Silent (see P.2-7) M
B For operations during calls, see P.2-3.
2-6
1
When a call arrives, open handset
N
J
P
<<Incoming Call>>
03123XXXX1
Menu
Number appears when Caller ID is sent. Caller's
name appears if saved in Phone Book.
When Message Recorder is Active
^ Outgoing message plays and recording starts
(see P.15-4).
Press f
2
^ Alternatively, press any of the following keys
(Anykey Answer): 0 - 9, q, p,
k, i, e, d, B, A
C
Handling Incoming Calls: see P.2-9 - 2-11
Press g to end call
3
^ Alternatively, close handset (clamshell closed).
Cancel Close to End Call to keep the line open
with handset closed (see P.2-3).
A
To end the call, press
c
Place caller on hold (see P.2-9)
(Long Press)
L
Decrease Ring Tone volume
Increase Ring Tone volume
Caller ID
C Phone numbers appear only when Caller ID is sent.
C Picture Call/Mail (see P.5-7) and Personal Ring Tone (see P.5-10) are disabled and
Caller's name does not appear for Phone Book entries on Memory Card.
Ring Tone Volume
C Press C (up) or D (down) to adjust volume.
^ Ring Tone Level setting (see P.8-2) changes accordingly.
^ Cancel Manner Mode to adjust the level.
Quick Silent
C Press j to instantly mute Ring Tone for that call only.
C When Side Key Settings for Incoming Calls (see P.15-3) is set to 2 Quick Silent,
press the assigned key for 1+ seconds with clamshell closed during incoming calls to
mute ringer.
To Activate/Cancel Anykey Answer
C Press b
A
A
Press b
Select Functions
Select 0 Call Functions
A
Press b
A
Select 8 Anykey Answer
A
Press b
^ Anykey Answer is active by default.
+
^ Up to 20 incoming call details are saved (see P.2-16).
^ Activate Delayed Ringer (see P.2-12) to delay handset ringer for three seconds for
incoming calls from numbers not saved in Phone Book or Owner Profile.
^ To customize Ring Tone and Mobile/Small Light pattern, see P.8-2 "Call Functions."
A
Select 1 Sounds
A
Press b
A
Select 1 Incoming Call
A
Press b
A
A
Choose 1 On or 2 Off
A
Press b
2-7
2
Advertisement
Chapters
Table of Contents
