Barcode - Sharp GC40K Manual

^ Countdown is not affected by incoming calls. Press g after the call to return to
+
Kitchen Timer window.
^ Press j for 1+ seconds to activate or cancel Manner Mode.
^ Alarm (see P.16-7) is disabled while Kitchen Timer window is open, but is
reactivated automatically when handset returns to Standby.
^ Count continues even if handset is closed. (R flashes on Sub Display.)

Barcode

Scan printed barcodes with mobile camera or download QR Codes via Web or Super
Mail. Scan UPC (JAN) or QR Codes in Normal or Continuous modes.
Read UPC (JAN) or QR Codes one at a time. Handset automatically
Normal
detects split QR Codes.
Continuous Read multiple UPC (JAN) or QR Codes consecutively
^ Scan UPC (JAN) or QR Codes. Handset automatically detects code type and reads data.
^ In Continuous mode, scan up to 50 UPC (JAN) or 16 QR Codes at one time. In some
cases, continuous scans may be disrupted depending on barcode data or data size.
^ Hold handset vertically with Earpiece (see P.1-5 8 ) up when capturing barcodes.
^ Zoom is not available.
, ^ If handset is too hot, Heat Warning: Camera Temporarily Disabled appears and
mobile camera cannot be activated. If handset becomes too hot while scanning,
Temperature High Closing Camera... appears and scanning ends.
^ Barcodes cannot be scanned while:
B Music Player is active
B Memory Card data is being synchronized
B V-Application is active
B Using a function opened with Hot Switching
^ Scanning may fail if the barcode is dirty or unclear.
^ It is recommended to use Mobile Light when scanning barcodes indoors.
^ Capture one barcode at a time. If not, handset may fail to scan.
^ UPC (Universal Product Code) or JAN (Japanese Article Number) is a series of
+
varying width vertical lines (called bars) and spaces. Bars and spaces together are
elements, combinations of which represent different numbers. Handset cannot read
other one-dimensional barcodes (ITF Code, Code39, Codabar/NW-7, etc.).
16
^ QR (Quick Response) Code is a matrix symbology consisting of an array of
nominally square cells. It allows omni-directional reading of up to 7,366 characters
― ― ― ― numeric, alphanumeric, byte data as well as kanji and kana.
^ QR Code is a registered trademark of DENSO WAVE INCORPORATED.
16-34
Scan & Capture
Use mobile camera to scan printed barcodes. Activate mobile camera from Barcodes
menu or during text entry.
Scanning from Barcode Menu
Paste scan results into text entry windows or use URLs as hyperlinks.
H
Index Menu Handy (e)
Select Barcodes and press b
1
C If Music Player is active or Memory Card data is being synchronized, choose 1Yes
Press b
Select 1 Scan Code and press b
2
Camera activates in Macro mode.
Press k to toggle between Normal Scanning and Continuous Scanning.
C
C Press p to toggle Mobile Light On (Macro) and Off.
Use E to adjust Brightness.
C
3
Frame barcode in the center of Display
Press b
4
Mobile camera scans the barcode.
^ Change Auto Focus mode if barcode cannot be read in Macro mode.
Press j to toggle Auto Focus mode between Standard, Manual and Macro.
C
Press e 3 to stop scan A
C
Start over from Step 2
+
For Focus Lock, see P.7-7. For Manual Focus, see P.7-24.
5
Barcode recognition tone sounds and scan results appear
C
Using Scan Results: see P.16-36
To start over, press d W A Choose 1Yes
C
Split Data
C After scanning, Split Data Scan next Symbol? appears.
^ To scan next code, choose 1 Yes A
A Press b
^ To cancel, choose 2 No A Press b
C Data will not be saved until all split data is scanned.
C The scanning status appears on the first line of Display.
For example, r indicates that 1 of 4 codes has been scanned.
A
A Press b A
Perform from Step 2
Press b A
Frame the code on Display
A Choose 1 Yes A Press b
16-35
16