Battery & Charger; C Getting Started - Sharp GC40K Manual

Table of Contents

Advertisement

5
Insert another Texture Panel
1
^ Position and slide the panel as
shown until it stops.
6
With Portrait/Macro Selector
set to Portrait, close cover
^ Position and slide the cover as
shown until it stops.
^ Make sure these tabs are fitted into
slots.
,
^ Never use handset without Texture Panel. Damage may result from accumulated dust.
^ Texture Panel may become loose after repeated replacements.
1-16
7
Push in Battery Cover Latch
until it clicks
Battery & Charger
Getting Started
Charge a new battery before use or after a period of disuse.
Battery Life
^ Use specified Charger only. Other
chargers may damage handset, or
cause battery to deteriorate, overheat
or ignite.
^ Do not use or store battery at extreme
temperatures. May shorten battery life.
*Ideal working temperature is between
5 ] C - 35 ] C.
^ Replace battery if operating time is
noticeably shorter than normal.
Charging
^ Do not use Charger for other purposes.
^ Battery may short-circuit, overheat or
burst from contact with metal objects.
^ Small Light illuminates red while charging.
(It may take a while for the light to
illuminate when handset power is off.)
+
^ Battery must be inserted to charge handset.
^ Handset will charge with power on. J flashes and stays on when complete.
^ Handset will charge while open.
^ Charging takes approximately 115
minutes (with handset power off).
B Charging time may vary by ambient
temperature.
^ Charger and battery may become warm
during charging.
^ Move Charger away from home TVs or
radios if interference occurs.
Precautions
^ Use a dry cotton swab to clean handset,
battery and Charger terminals.
^ Avoid:
B Extreme temperatures
B Humidity, dust and vibration
B Direct sunlight
^ Do not leave battery uncharged. Charge
at least once every 6 months.
^ Use a case when carrying battery
separately.
1-17
1

Advertisement

Table of Contents
loading

Table of Contents