C Recording Settings; Monitor Level; Synchro Recording; Bit Rate - Sharp GC40K Manual

6
Start playback
Recording starts automatically when handset detects sound.
^ For analog sources, recording may start even while playback is paused.
^ Do not remove Memory Card or battery while recording. Doing so may
,
damage the card or result in lost information.
^ Do not touch cables or plugs while recording. May cause noise or skipping.
+
Manual Track Bookmark Creation (see P.10-6)
Press d 7 while recording.
7
To stop recording, stop playback on the audio source
Recording pauses, then stops after 15 seconds.
When Synchro Recording is Off, press b to stop recording.
C
^ If 2No was selected in Step 3 on P.10-9, Off-Line mode is canceled after recording ends.
^ When recording from PCs or BS/CS digital tuners, recording level may decrease.
,
^ Unchecked tracks recorded with J-SH51/J-SH52 will be deleted when the Memory
Card is used for V604SH Music Player.
+ ^ Alarm is disabled while recording, and starts after Music Player stops/closes.
^ Recorded music is saved by date and time by default. To rename music files, see
Step 2 on P.10-15.
10
Recording Settings
Follow these steps after Step 3 on P.10-9.

Monitor Level

Set volume level to listen to music while recording
Press d I A
Select Monitor Level
with E A Press b
Start recording automatically when playback starts on audio

Synchro Recording

sources
Press d I A
Select Synchro Recording
1 On or 2 Off A Press b
10-10
KLevel 3
A Press b A
Select a level
KOn
A Press b A
Choose

Bit Rate

Select a bit rate (see P.10-5 "Recording Time")
Press d I A
Select Bit Rate
2 128 kbps A Press b
^ Sound quality is better at 128 kbps. However, recording time shortens as more space is
required in memory.
Select sensitivity to detect silence for creating Track

Track Break Level

Bookmarks
Press d I A
Select Track Break Level
1 -41 dB or 2 -59 dB A Press b
^ Select -59 dB for soft music to prevent unintended Track Bookmark creation.

Playing Music

Basic Functions
Play music on Memory Card.
^ Use Headphones (with built-in TV antenna) to listen to music without bothering others.
Connect to handset as shown on P.6-5.
^ Alternatively, play music from handset speaker.
Precautions before Playing Music
^ Grasp the plug when connecting or disconnecting Headphones. Do not bend the plug to
avoid damaging the cord or Headphone Connector.
^ Use only the specified Headphones. Other devices may not function properly and cause
damage to Headphone Connector.
^ When battery is low ( L ), Music Player does not play. If battery runs low during playback,
Low Battery appears and Music Player shuts down automatically.
^ Do not remove Memory Card during playback.
K96 kbps
A Press b A Select 1 96 kbps or
K-41 dB
A Press b A
Select
10-11
10