Handset Power On/Off; Key Guard - Sharp GC40K Manual

Handset Power On/Off

1
1 1 1 1
2 2 2 2
3 3 3 3
Clock Settings & Network Setup
C If date and time have not been set, a confirmation appears after Power On Graphic.
Choose 1 Yes A Press b A
B Choose 2 No A Press b A
C Handset initiates Network Setup when b , e , d , i , k , j or C is pressed
for the first time.
To continue, choose 1 Yes
^ See I P.1-4 for more about Network Setup.
+
^ Handset receives incoming mail or Web/Station information while closed.
^ Display shuts down after a period of inactivity (see P.15-41 "Panel Saving").
1-26
1
Open handset (clamshell open)
2 Press g for 1+ seconds
N
J
Backlight illuminates; after Power On Graphics,
handset enters Standby (shown above).
Press g for 2+ seconds to exit
3
After Power Off Graphic, handset shuts down.
Clock Settings window opens (see P.1-28)
Standby appears without date and time
A Press b

Key Guard

Use Key Guard to lock handset keys and prevent accidental activation of functions or
operations.
Activating
Press b for 1+ seconds
1
M appears and Key Guard is set.
+
1 1 1 1
Canceling
In Standby, press b for 1+ seconds
1
M disappears.
When Key Guard is Active
^ Incoming calls temporarily cancel Key
Guard. To answer calls, press keys for
Anykey Answer (see P.2-6), or press h
for 1+ seconds in Viewer position. Key
Guard reactivates after the calls end.
^ Handset power does not turn off even if g
is pressed for 2+ seconds.
1-27
1