C Installing & Removing Battery - Sharp GC40K Manual

C Indicator
1
Battery Strength indicator varies as shown.
Charge or replace when level is low.
Battery Strength indicator is for reference only.
Recharge Battery appears.
Charge or replace battery immediately.
J K
Level 3 Level 2
Approx. 70% Approx. 20% Approx. 10%
Remaining Strength (at 25]C)
C Battery Strength & Environment
At low temperatures, battery is consumed faster.
At high temperatures, battery lasts longer.
,
At Level 1, some functions including Music Player, Voice Recorder, Motion Camera
(MPEG) mode, etc. do not operate (see P.6-20, P.9-4, P.9-11, P.10-2).
Small Light & Battery Strength Indicator
C Handset Power On
Small Light Indicator (J)
Off Flashes
Flashes red Flashes
Illuminates red Flashes
Off Illuminate
C Handset Power Off
Small Light Indicator (J)
Off Off
Flashes red Off
Illuminates red Off
Off Off
1-20
Minimum Operating
Voltage
L M
Level 1 Level 0
Hours of Use
Conditions
Ambient temperature is outside the range of 5]C - 35]C
Battery life has ended, or battery defect
Charging
Charging completed
Conditions
Ambient temperature is outside the range of 5]C - 35]C
Battery life has ended, or battery defect
Charging
Charging completed
Installing & Removing Battery
Inserting
Turn handset power off before inserting battery.
1
Slide Portrait/Macro Selector
to Portrait
2
Pull out Battery Cover Latch
as shown in e , then slide
cover as indicated in f
e
f
3
Lift and remove cover as
shown
^ Do not remove Texture Panel.
4
Insert battery
f
e
^ With printed side up, fit tabs into
battery cavity slots.
5
With Portrait/Macro Selector
set to Portrait, close cover
^ Position and slide the cover as
shown until it stops.
^ Make sure these tabs are fitted into
slots.
6
Push in Battery Cover Latch
until it clicks
1-21
1