Shake Counter; Shake Sound - Sharp GC40K Manual

Table of Contents

Advertisement

Shake Counter

Count up/down numbers by shaking handset.
^ Read the precautions on P.1-14 before using Shake Counter.
^ Use Shake Counter with clamshell open or closed, or in Viewer position.
^ Adjust Sensitivity Level of shake recognition.
^ Count up to 99,999 shakes.
^ Save counts to Text Memo on handset or Memory Card.
H
A
Index Menu
Handy (e)
Briefcase
1
Counting Up
1 Select 1 Count and press b
Counting Down
1 Select 2 Count Down and press b
2 Enter numbers (1 - 99999 counts) and press b
Press b
2
^ hStop appears. (Shakes are countable while it appears.)
3
Shake handset
Shake Counter starts counting.
^ When counter reaches 0 or 99,999, Alarm Tone sounds and LED Indicator
+
flashes. (Alarm Tone is fixed to Pattern 1. Volume and LED Indicator depend
on the settings for Sound Volume and Set LED to Sound respectively.
Vibration is Off.)
B Alarm stops automatically after 60 seconds. Press b to stop manually.
B In Manner Mode, handset vibrates. (Vibration Pattern is Vibration 1. Volume
and LED Indicator depend on Manner Settings.)
B Alarm Tone and Vibration Pattern cannot be changed.
^ No tone sounds while counting.
Press b to stop
4
C
To save the count to Text Memo, press d I
b
A
Choose 1Yes
A
Press b
B To check saved counts, see P.4-18.
16
Press b to resume.
C
Press e l to clear the count.
C
Press g or i to exit
5
When Shake Counter is active or paused, choose 1Yes
C
16-26
A
Shake Counter
A
A
Select Save Text Memo
Press
A
Press b
Sensitivity Level
C Follow these steps after Step 1 on P.16-26.
Press d I
A
Select Sensitivity Level
1 Level 1 to 5 Level 5
A
Press b
^ Sensitivity decreases as the level number increases.
,
^ Do not shake handset roughly. Handset may slip, resulting in injury or damage.
^ Do not drop or subject handset to shocks.
^ When Shake Counter does not work correctly, adjust MC Sensor (see P.16-24).
^ If Alarm Time arrives (see P.16-7) while Shake Counter window is open, no tone will
+
sound. Cancel Shake Counter to activate Alarm.
^ Count continues even while handset is closed or in Panel Saving mode.

Shake Sound

Shake handset to produce sound effects.
^ Read the precautions on P.1-14 before using Shake Sound.
^ Use preset files or compatible files in Data Folder for sound effects. Some files on
Memory Card may not be usable.
H
A
A
Index Menu
Handy (e)
Briefcase
1
Volume
1 Press C (up) or D (down) to adjust volume
^ Each press changes volume in the following order:
C
1 % 2 % 3 % 4 % 5 % Shaker
1
For Shaker, volume changes according to the strength of shaking.
+
In Manner Mode, Shake Sound volume depends on Manner Settings (see P.3-5
"Sound Volume").
A
Press b
A
Select from
Shake Sound
D
1
1
% 5 % 4 % 3 % 2 % 1
Shaker
16-27
16

Advertisement

Table of Contents
loading

Table of Contents