Handy Call Functions; C Signal Alert; C Push Tones; Side Key Settings - Sharp GC40K Manual

F 38

Handy Call Functions

Signal Alert
When Signal Alert is active, handset emits warning beeps when the signal is weak
and the call may be disconnected. Signal Alert is Off by default.
H A
Index Menu Functions Settings 1
Choose 1 On and press b
1
C To cancel Signal Alert, choose 2Off
,
Even when Signal Alert is active, calls may be disconnected without warning.
Push Tones
Use Push Tones to send alphanumeric messages to pagers or operate a home
answering machine remotely.
From Phone Book
Use this function to send set messages to pagers.
^ Save Push Tones to Phone Book first (see P.5-4).
^ When saving Push Tones to Phone Book ( e ), do not save other information to that entry.
1
After a connection is established, open a Phone Book entry (see
Steps 1 - 3 on P.5-11)
Press b
2
Select Send All Push Tones and press b
3
+
Enter a comma (Pause) in Push Tones to separate each sequence. To send
following sequences, press d g for each.
Direct Entry
16
Press Keypad to send individual Push Tones during calls.
1
After a connection is established, use Keypad to enter numbers
^ For more information, see the manual for the recipient device/corresponding service.
^ Use 0 - 9, U and # to send Push Tones.
Press d g
2
16-2
A
Signal Alert
A Press b

Side Key Settings

For Incoming Calls
Press a Side Key for 1+ seconds to activate the assigned function while ringing/
vibrating.
Available Functions:
Hold Place callers on hold
Quick Silent Temporarily mute ringer for incoming calls
Reject Call Reject and end the call
Message Recorder Record caller messages on handset
Forward Voice Mail Forward incoming calls to Voice Mail Center
^ The same function can be assigned to multiple keys.
^ Message Recorder is assigned to r by default. (No function is assigned to other keys.)
H A A
Index Menu Functions Settings 1
Select from 1x to 5w and press b
1
Select a function and press b
2
To cancel, choose 6Off A Press b
C
Standby r
In Standby, press r for 1+ seconds to activate the assigned function with clamshell
closed.
Available Functions:
Voice Recorder (Accept) Activate Voice Recorder (incoming calls, mail, etc. are accepted)
Voice Recorder (Reject) Activate Voice Recorder in Off-Line Mode
Manner Mode Activate Manner Mode
Standby r is Off by default.
H A A
Index Menu Functions Settings 1
Select a function and press b
1
To cancel, choose 3Off A Press b
C
+
Press s in Standby to activate an assigned function (see P.16-24).
A
SideKey Settings Incoming Calls
A Standby w
SideKey Settings
16-3
F 39
16