Initiating Calls; Answering Calls; C Ringer Out; Fax & Pc Transmissions - Sharp GC40K Manual

Table of Contents

Advertisement

Headphones (with Built-in TV Antenna)

Initiating Calls

Use Call Button on Headphones (with built-in TV antenna) to call the primary number
saved in Memory No. 000 (see P.5-5).
1
Plug Headphones into handset
2
Press Call Button for 1+ seconds until a double beep sounds
^ The number is dialed.
3
Press Call Button for 1+ seconds until a beep sounds
Call ends. Alternatively, press g to disconnect call.
^ Closing handset does not end the call.
,
^ If Memory Number 000 is a Secret Mode entry, activate Secret Mode to call the
primary number saved in that Phone Book entry (see P.15-6).
^ Cancel Keypad Lock (see P.15-2) and Phone Book Lock (see P.15-3), and stop
recording TV/FM to place calls.
^ Do not wrap cord around handset or Internal Antenna locations (see P.1-7 W). This
may cause malfunction. Noise interference occurs if cord is close to Internal
Antenna locations.
^ Plug in Headphones firmly. If not, sounds may not be heard.

Answering Calls

1
Plug Headphones into handset
Ring Tone sounds from Headphones only or from both Headphones and handset speaker
depending on the setting (see P.16-51).
2
Press Call Button for 1+ seconds to answer a call
3
Press Call Button for 1+ seconds until a beep sounds
Call ends. Alternatively, press g to disconnect call.
^ Closing handset does not end the call.
16
16-50
Ringer Out
When Headphones are connected to handset, Ring Tone sounds from Headphones
and handset speaker. Disable speaker as shown below. Earphone/Speaker is set by
default.
H
A
A
Index Menu
Functions
Sounds
Ringer Out
Select 1 Earphone and press b
1
To use Headphones and speaker, select 2Earphone/Speaker
C
+
Even if Earphone is selected, Ring Tone sounds from speaker when Headphones
are not connected.
Fax & PC Transmissions
Fax
Use handset for fax transmissions via data/fax card
Transmissions
Connect a data/fax card
^ FAX COM. appears during G3 FAX transmissions.

PC Transmissions

Use handset for PC transmissions via data/fax card
Connect a data/fax card
^ MODEM COM. appears during PC transmissions.
,
Use handset for fax or PC transmissions only when signal conditions are stable.
^ Sign-in window may differ by data/fax card.
+
^ Handset supports 9,600 bps high-speed data transmissions.
^ To connect data/fax cards to fax machines or PCs, see the manuals for the device.
F 15
A
Press b
16
16-51

Advertisement

Table of Contents
loading

Table of Contents