8: Daylight Savings; 9: History; 10: Print; 11: Ann-Bus - Honeywell MRP-2002 Instruction Manual

Operating Instructions
4.15.8 Daylight Savings
Pressing 2 while Read Status Screen #3 will cause the following screens to be displayed:
These screens allow the operator to view settings that have been programmed for Daylight Savings
Time.
4.15.9 History
Pressing 3 while viewing Read Status Screen #3 will display the following screens:
The operator can view all events which have been stored in the history file, only alarms or other
events, such as troubles or supervisories, by pressing the corresponding number key.
4.15.10 Print
To print control panel data, press 2 while viewing Read Status Screen #4. This allows printing to
READ STATUS
1=PRINT
the printer connected to the ANN-S/PG module. The following screens will be displayed:
2=ANN-BUS
Read Status Screen #4
Pressing 1 allows the user to print the History file which will detail all of the system activities since
the file was last cleared from memory.
Pressing 2 allows the user to print the Walktest log which will detail all of the system activations
during walktest since the log was last cleared. Refer to "Walktest" on page 75 for additional infor-
mation on the display.
Pressing 3 will exit the Print operation.
4.15.11 ANN-BUS
Pressing 2 while viewing Read Status Screen #4 will display the settings for the ANN-BUS options
as shown in the following screens:
ANN-BUS Screen #1 indicates whether the ANN-BUS is enabled (Yes/No).
Pressing 1 while viewing ANN-BUS Screen #1 will display BUS Module addresses 1-8 and the
devices, if any, located at those addresses.
Pressing 2 while viewing ANN-BUS Screen #1 will display the programmed options for the
ANN-S/PG Module devices connected to the ANN-BUS.
Pressing 1 while viewing ANN-BUS Screen #2 will display the programmed options for the
ANN-80 LCD annunciators connected to the ANN-BUS.
Pressing 2 while viewing ANN-BUS Screen #2 will display the programmed options for the
ANN-RLY devices connected to the ANN-BUS.
90
DAYLIGHT SAVINGS
ENABLED YES
START MONTH MAR
START WEEK WK 2
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
1=HISTORY
2=WALKTEST LOG
3=EXIT PRINTING
ANN-BUS
BUS ENABLED NO
1=BUS MODULES
2=ANN-S/PG OPTIONS
ANN-BUS Screen #1
MRP-2002 Series Instruction Manual — P/N 53049:E5 7/28/2016
DAYLIGHT SAVINGS
END MONTH
END WEEK
HISTORY
PRINT
ANN-BUS
1=ANN-80 OPTION
2=ANN-RLY OPTIONS
ANN-BUS Screen #2
Read Status
NOV
WK 1