Operating Instructions
4.19.6 Daylight Savings
4.19.7 History
READ STATUS
1=HISTORY
2=PRINTER
3=ANN-BUS
Read Status Screen #3
4.19.8 Print
124
Pressing 3 while Read Status Screen #2 will cause the following screens to be displayed:
ENABLED
START MONTH
START WEEK
END MONTH
END WEEK
These screens allow the operator to view settings that have been programmed for Daylight Savings
Time.
Pressing 1 while viewing Read Status Screen #3 will display the following screens:
1=VIEW ALL
2=VIEW ALARMS
3=VIEW OTHER EVENTS
The operator can view all events which have been stored in the history file, only alarms or other
events, such as troubles or supervisories, by pressing the corresponding number key.
To print program data or control panel status, press 2 while viewing Read Status Screen #3. The
following screen will be displayed:
1=HISTORY
2=WALKTEST LOG
3=EXIT PRINTING
DAYLIGHT SAVINGS
DAYLIGHT SAVINGS
NOV
WK 3
HISTORY
PRINT
MS-5UD & MS-10UD Series Manual — P/N 52626:C2 1/24/2012
NO
MAR
WK 3
Read Status