Time/Date Setup; Setting Daylight Savings Time; Setting Current Time And Date - Honeywell Tuxedo Touch WIFI Installation And Setup Manual

Time/Date Setup

You can set the time and date from the Set Time & Date screen.
When the time is set it is stored in the keypad and sent to the control panel when you press Apply and
answer Yes to the following prompt. Additionally, when using the keypad, the panel may download its
time into the keypad periodically after the clock is set (for Vista residential and newer commercial
panels such as Vista 128BPT).
If the Get Time icon is pressed, the keypad downloads the time and date from the control panel and
exits the Set Time & Date screen. Note: This icon
appear with all commercial panels.

Setting Daylight Savings Time

To set the daylight savings time, from the "Home" screen do the following:
ICON
1. Press Setup and the System Setup icon.
2. Press the Time/Date Setup icon and enter
your Authorized Code.
3. Press the DST icon if you want daylight
savings time to affect your system clock.
4. Set the "Start DST" time and then the "End
DST" time by pressing the Month, Weekend
and Hour that you want DST to start.
5. APPLY saves the settings.

Setting Current Time and Date

To set the current time, do the following:
ICON
1. Press the Time/Date Setup icon; enter your
Authorized Code.
2. Press the Month "arrow", and select the
current month.
3. Press the Year that is being displayed and
enter the current year.
4. Press the Hour that is being displayed and
enter the current hour.
5. Press the Minutes that is being displayed
and enter the current minute.
6. Select AM or PM. (Each depression switches
the AM/PM display).
7. Press the MMDDYY "arrow", and select a
format for which you want the year to be
displayed.
8. Press Apply.
User System Setup (cont'd)
ACTION
ACTION
28
appears with residential panels and may not
NOTES
If DST On (Daylight Savings Time) is selected,
the keypad adjusts for Daylight Savings time at
the month, week and time chosen.
Make sure "DST" On" is checked to enable this
feature.
NOTES
After each selection the window closes
automatically and the selection is displayed.
The selected date is highlighted on the screen.
Select if you want a 12-hour or 24-hour format
for your time display by pressing the circle to the
left of the 12 Hour display.
A confirmation screen displays:
Time Setting Confirmation
Set time on the security system as well?
Yes or No
Yes saves the time changes in your security
system.
No saves the changes to the keypad only.
Note: A Yes response is recommended.