Specifying Split-Screen Display - Canon WUX6000 User Manual

Setting Display Status (Input Settings)
Specifying Split-
Screen Display
> [Input settings] >
HDMI
Digital PC
You can project two input images
side by side. (P67)
Off Exit split-screen mode.
On Activate split-screen mode.
Settings
Split Off
screen
On
Control Left
rights screen
Right
screen
Swap
right-
left
Layout Mode 3-7 Use 30% of the screen
Mode 5-5 Divide the screen
Mode 7-3 Use 70% of the screen
Downloaded from ProjectorsManual.com Manuals
[Split screen]
Component LAN
Analog PC USB
Exit split-screen mode.
Activate split-screen
mode.
Give control rights to
the left side. "1" is
displayed on the left.
Give control rights to
the right side. "2" is
displayed on the right.
Switch the sides that
images are projected
on.
width for the left side
and 70% for the right.
width evenly for the left
and right side.
width for the left side
and 30% for the right.
Press the OK button to accept your
setting and then press the MENU
button. The image with control rights is
labeled "1" or "2."
• [Off] is the factory default.
• If or is displayed in the center of the
image area, switch control to the other side
by pressing the [ ] / [ ] buttons on the
remote control.
• When you switch to split-screen display, the
left and right signals and input status are
shown in the input window.
Network and USB input cannot be
combined for split-screen display.
82