Windows Vista - Canon WUX6000 User Manual

Example
IP address: 192.168.254.1
Subnet mask: 255.255.255.0
7
When the settings are completed, click the [OK] button and then click the
[OK] button on the [Local Area Connection Properties] window to close it.

■ Windows Vista

1
From the PC [Start] menu, select [Control Panel].
2
Click on [View network status and tasks].
3
From the menu on the left side of the window, click on [Manage network
connections].
4
Right-click [Local Area Connection], and open [Properties].
5
Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
6
Select [Use the following IP address] and set the IP address and subnet
mask.
The factory default IP address for the projector is "192.168.254.254". Set an IP
address which is different from this.
Downloaded from ProjectorsManual.com Manuals
Completing Computer Settings
175