Specifying A Menu Position; Showing/Hiding The Guide Screen - Canon WUX6000 User Manual

Specifying a Menu
Position
> [Install settings] > [On screen] >
[Menu position]
HDMI
Digital PC
You can change the position of
menus displayed.
Use the [ ] / [ ] / [ ] / [ ] buttons to
move the menu to the desired position.
After you have moved the menu to the
desired position, press the OK button to
accept your setting, and then press the
MENU button.
Downloaded from ProjectorsManual.com Manuals
Component LAN
Analog PC USB
Installation-Related Menu Settings
Showing/Hiding the
Guide Screen
> [Install settings] > [On screen] >
[Guide]
HDMI
Digital PC
You can select whether to show or
hide the guide screen which explains
operations.
Off Hides the guide screen.
On Shows the guide screen.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [On].
• The guide screen is shown at the following
times.
- When no input signal can be detected.
(P140)
- When an invalid button is pressed in the
[BLANK], [FREEZE] or [D.ZOOM] mode.
(P62, P64)
- When the positional lock is set to [On].
(P141)
- When the projector is already on and the
POWER button is pressed.
149
Component LAN
Analog PC USB