Selecting Audio Input - Canon WUX6000 User Manual

Customizing System Operation (System Settings)

Selecting Audio Input

> [System settings] > [Other settings] >
[Audio in terminal select]
HDMI
Digital PC
You can select the audio input
terminal to use for each type of input
signal.
Off No audio is output.
Audio in 1 Use audio signals from AUDIO
IN 1 for audio output.
Audio in 2 Use audio signals from AUDIO
IN 2 for audio output.
HDMI Use HDMI audio signals for
audio output. (Only for HDMI.)
LAN Use LAN audio signals for
audio output. (Only for LAN.)
Audio is transferred by the
NMPJ application.
Press the OK button to accept your
setting and then press the MENU
button.
Downloaded from ProjectorsManual.com Manuals
Component LAN
Analog PC USB
• The factory defaults are as follows.
[HDMI]: HDMI
[Audio in 1]:
Digital PC, Analog PC-1, USB
[Audio in 2]:
Analog PC-2, Component
[LAN]: LAN
106