Specifying Hdmi Input; Resetting The Lamp Counter - Canon WUX6000 User Manual

Customizing System Operation (System Settings)

Specifying HDMI Input

> [System settings] >
HDMI
Digital PC
Set the type of equipment which is
connected to the HDMI port. Note
that to some extent, the [HDMI In]
setting determines which image
modes are available. (P57)
Auto Select when AV equipment will
be connected. Image
processing, menu displays,
and other elements are
adjusted for video equipment.
Computer Select when a computer will be
connected. Image processing,
menu displays, and other
elements are adjusted for a
computer.
Press the OK button to accept your
setting and then press the MENU
button.
• [Auto] is the factory default.
Downloaded from ProjectorsManual.com Manuals
[HDMI In]
Component LAN
Analog PC USB
Resetting the Lamp
Counter
> [System settings] > [Other settings] >
[Lamp counter]
HDMI
Digital PC
You can reset the lamp counter that
indicates the time for lamp
replacement.
Do not reset the lamp counter
except when you have replaced
the lamp. Otherwise, the lamp
counter cannot indicate the
correct timing for replacing the
lamp.
For details of lamp replacement, refer
to page 197.
Select [Lamp counter] and press the
OK button to display the lamp counter.
Select [Reset] and press the OK button.
108
Component LAN
Analog PC USB