Canon WUX6000 User Manual page 174

Completing Computer Settings
Example
IP address: 192.168.254.1
Subnet mask: 255.255.255.0
8
When finished, click the [OK] button, and then click the [Close] button in
the [Ethernet Properties] window to close it.
■ Windows 7
1
From the PC [Start] menu, select [Control Panel].
2
Click on [Network and Internet], then click on [View network status and
tasks].
3
From the menu on the left side of the window, click on [Change adapter
settings].
4
Right-click [Local Area Connection], and open [Properties].
5
Select [Internet Protocol Version 4 (TCP/IPv4)] and click the [Properties]
button. Make a note of the original network settings (IP address, subnet
mask, default gateway, etc).
6
Select [Use the following IP address] and set the IP address and subnet
mask.
The factory default IP address for the projector is "192.168.254.254". Set an IP
address which is different from this.
Downloaded from ProjectorsManual.com Manuals
174