Canon WUX6000 User Manual page 121

2
Loosen the cosmetic panel screw, then slide the cosmetic panel toward
the rear to remove it.
The cosmetic panel screw is attached to the cosmetic panel and designed to
prevent it from falling off.
3
In order to prevent damage, close the lamp cover and temporarily fasten
the screw.
4
Remove the sleeve screws (2 on top and 2 on bottom).
After the 2 screws on top are removed, turn the projector upside down on a flat
desk or similar location and remove the 2 screws from the bottom.
Downloaded from ProjectorsManual.com Manuals
Installation Procedure
121