Showing/Hiding Filter Cleaning Warnings; Showing/Hiding Split-Screen Id - Canon WUX6000 User Manual

Installation-Related Menu Settings
Showing/Hiding Filter
Cleaning Warnings
> [Install settings] > [On screen] >
[Air filter warning display]
HDMI
Digital PC
A message advising you to perform
cleaning can be set to display when
the filter needs cleaning.
Off The air filter warning is not displayed.
On The air filter warning is displayed.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [On].
Setting [Air filter warning display] to
[Off] will disable the warning about
cleaning the air filter. We recommend
checking the air filter counter (P110)
occasionally to determine when to
replace the filter. When the counter
passes 300 hours, clean the filter
(P194).
Downloaded from ProjectorsManual.com Manuals
Component LAN
Analog PC USB
Showing/Hiding Split-
Screen ID
> [Install settings] > [On screen] >
[Split screen ID display]
HDMI
Digital PC
Specify whether to show or hide the
digit (1 or 2) that identifies screens in
split-screen mode. Note that even if
you select [Off], a marker will be
displayed in the corner of the screen
to identify the screen that has
control rights.
Off Hides the screen ID.
On Shows the screen ID.
When you have completed the
adjustment, press the OK button to
accept your setting and then press the
MENU button.
• The factory default is [On].
152
Component LAN
Analog PC USB