Side currently under control
(input signal can be
switched)
Current input signal of side
with control rights
Current input signal of side
without control rights
To exit split-screen display, select [Input settings] tab > [Split screen] > [Off].
• If you specify [LAN] or [USB] as an input signal, the screen width is evenly divided
between the left and right areas. (P82)
• When projection resumes from standby or after the lamp is momentarily turned off in
split-screen mode, display reverts to single-image mode, showing the input signal with
display rights.
Downloaded from ProjectorsManual.com Manuals
Split-Screen Display
69