Replacing The Air Filter - Canon WUX6000 User Manual

Replacing the Air Filter

Follow the procedure below when replacing the air filter.
1
Turn off the projector power and remove the power plug.
2
Hook your finger around the air
filter frame handle on the side of
the projector, and pull the air
filter out to remove it.
3
Remove the filter from the air
filter frame. First disengage the
tab on the inside, then remove
the entire air filter from the
frame.
4
Install a new air filter into the
frame. First insert the air filter
tab into the groove on the handle
side of the frame, then press the
air filter into the frame.
5
Securely insert the frame
holding the air filter, all the way
into the projector.
• Handle the air filter carefully. If damaged, the air filter will not work properly.
• When the lamp is replaced, it is recommended that you also replace the air filter.
• Contact the Canon Customer Support Center for further information.
• Replacement air filter part no.: RS-FL01
• This can also be purchased from the Canon website.
Downloaded from ProjectorsManual.com Manuals
Air filter frame
handle
Air filter frame
196
Air filter
Air filter