Specifying The Screen Aspect - Canon WUX6000 User Manual

Installation-Related Menu Settings
Normal (None)
Ceiling Mounting
Rear projection
Rear, Ceiling Mounting
• To hang the projector from the ceiling, use
the optional bracket. Contact the Canon
Customer Support Center for more detailed
information.
• If you flip the image, the keystone distortion
adjustment will be reset. Perform the
adjustment again.
Downloaded from ProjectorsManual.com Manuals
Specifying the Screen
Aspect
> [Install settings] >
HDMI
Digital PC
Select according to the aspect ratio
of the projection screen. (P48)
16:10 Select this when you use a
screen with an aspect ratio of
16:10.
16:9 Select this when you use a
screen with an aspect ratio of
16:9.
4:3 Select this when you use a
screen with an aspect ratio of
4:3.
16:9 Select this when you use a
D. image screen with an aspect ratio of
shift 16:9.
Keystone correction cannot be
performed in this mode.
However, it is possible to
move the image up / down
when projecting level.
For details about how to move
the image, refer to
4:3 Select this when you use a
D. image screen with an aspect ratio of
shift 4:3.
Keystone correction cannot be
performed in this mode.
However, it is possible to
move the image left / right
when projecting level.
For details about how to move
the image, refer to
142
[Screen aspect]
Component LAN
Analog PC USB
page 50.
page 51.