Specifying The Menu Display Time; Showing/Hiding Lamp Replacement Warnings - Canon WUX6000 User Manual

Specifying the Menu
Display Time
> [Install settings] > [On screen] >
[Menu display time]
HDMI
Digital PC
The setting for the menu display time
can be extended from the normal 10
or 30 seconds to 3 minutes.
Normal The menu is displayed for 10
or 30 seconds.
Extended The menu is displayed for 3
minutes.
Press the OK button to accept your
setting and then press the MENU button.
• [Normal] is the factory default.
• The following display times are also changed.
Item
- MENU screen
- Input (P40)
- Keystone adjustment
(P54)
- Keystone reset (P56)
- Focus adjustment (P44)
- Zoom adjustment (P45)
- Lens shift adjustment
(P46)
- Lens shift reset (P147)
- D.image shift
adjustment (P50, P51)
- D.image shift reset
(P52)
- Aspect (P53)
- Image Mode (P57)
- Volume adjustment
(P63)
- Gamma correction
(P87)
Downloaded from ProjectorsManual.com Manuals
Component LAN
Analog PC USB
[Normal] [Extended]
30 3
seconds minutes
10 3
seconds minutes
Installation-Related Menu Settings
Showing/Hiding Lamp
Replacement
Warnings
> [Install settings] > [On screen] >
[Lamp warning display]
HDMI
Digital PC
A message that advises you to
change the lamp can be set to
display when the lamp has been
used for the specified period of time.
Off The prepare lamp message and the
lamp warning are not displayed.
On The prepare lamp message and the
lamp warning are displayed.
When it is time to replace the lamp, the
LAMP indicator on the projector will
flash, and lamp replacement (P199) is
recommended at this time.
Press the OK button to accept your
setting and then press the MENU
button.
• The factory default is [On].
151
Component LAN
Analog PC USB