Exit From Configuration Mode - Honeywell DCP 50 Product Manual

Parameter
Cold Junction
Compensation
Enable/Disable*
Controller Set-Up
Mode Lock Code
Program Define
Mode Lock Code
* Appears only if a thermocouple input is selected (see Hardware definition Code).
6.5

EXIT FROM CONFIGURATION MODE

6-9
Identifier
Read Only display of current four-digit Set Up Mode
Lock Code.
Read Only display of current four-digit Program
Define Mode Lock Code.
NOTE: An automatic exit to Operator
Mode will be made if, in Configuration
Mode, there is no front panel key activity
for two minutes.
The exit is made via the power-up self-test
routines which include a lamp test.
Description
Enabled (default)
Disabled