Honeywell DCP 50 Product Manual page 74

DC Pulse/TTL
Drive Capability:
Isolation:
AC SSR
Operating Voltage Range:
Current Rating:
Max. Non-repetitive Surge
Current (16.6ms):
Min. OFF-State dv
dt
Voltage:
Max. OFF-State leakage @
Rated Voltage:
Max. ON-State Voltage Drop
@ Rated Current:
Repetitive Peak OFF-state
Voltage, Vdrm:
DC Analog
Resolution:
Update Rate:
Ranges:
(Changes between V and mA ranges also require link jumper movement.)
Load Impedance:
B-6
SSR >4.2V DC into 1k
Not isolated from input or other SSR outputs.
20 - 280Vrms (47 - 63Hz)
0.01 - 1A (full cycle rms on-state @ 25°C);
derates linearly above 40°C to 0.5A @ 80°C.
25A peak
@ Rated
500V/µs
1mA rms
1.5V peak.
600V minimum
Eight bits in 250mS (10 bits in 1 second typical,
>10 bits in >1 second typical).
Every control algorithm execution.
0 - 20mA
4 - 20mA
0 - 10V
0 - 5V
0 - 20mA: 500
4 - 20mA: 500
minimum.
Ω
maximum
Ω
maximum
Ω