Honeywell DCP 50 Product Manual page 57

Parameter
∆ & ∇ LEDs Usage
(on Front Panel)
Guaranteed
Soak
Enable/Disable
(see Subsection
3.2.5)
Delayed Start
Enable/Disable
Power Loss
Recovery
Start On
Communications
Protocol
Communications
Baud Rate
Communications
Address
Identifier
Selectable: 1200, 2400, 4800, 9600 Baud
Unique address assigned to the controller;
in the range 1 - 255.
Description
Ramp direction:
∆ = positive ramp
∇ = negative ramp
both = dwell
Output state:
∆ = Output 1 ON
∇ = Output 2 ON
Enabled
Disabled
Manual
Enabled
Disabled
Cold Start (program re-started from
beginning)
Warm Start (program resumed from
point at which power failed)
Start program with setpoint at
current process variable value
Start program with setpoint at
Controller Setpoint value
MODBUS with odd parity
MODBUS with even parity
MODBUS with no parity
Continued overleaf⇒⇒⇒⇒⇒⇒
6-8