Configuration Mode; Entry Into Configuration Mode; Hardware Definition Code - Honeywell DCP 50 Product Manual

6

CONFIGURATION MODE

6.1

ENTRY INTO CONFIGURATION MODE

Figure 6-1
NOTE: Changes to the value/setting of certain Configuration Mode
parameters (e.g. input range, output use and type) will cause the Set
Up Mode parameters to be automatically set to their default values the
next time Set Up Mode is entered (see also beginning of Section 4).
6.2

HARDWARE DEFINITION CODE

This parameter is a special facility in Configuration Mode, which is used to represent
the hardware fitted (input type, Output 1 type, Output 2 type and Output 3 type); this
must be compatible with the hardware actually fitted. For access to, and adjustment
of, the Hardware Definition Code, see Figure 6-2 and Table 6-1.
6-1
Entry into Configuration Mode